Liquid Cooled High-power Fast Charger

EV Charging Power Quality Soft Starter Smart Energy

Hotline：+86 710 2309484Inquiry

SSE liquid cooled high-power fast charger is composed of a charging host and two charging terminals with liquid-cooled connectors. Each charging interface complys with European or Chinese standard, and can independently achieve high-power ultra fast charging. It can be widely used in highway service areas, bus depots, electric vehicle charging stations etc., suitable for electric vehicles of different voltage levels, different brands, and different standards

Ultra fast charging
Liquid-cooled connectors enables high current and high power fast charging, with the max. output current of a single gun up to 500A

Strong adaptability
CCS2 or GB/T supported, 200V to 1000V wide output voltage range, compatible with multiple vehicle types

High flexibility
Charging cables with smaller diameter, light and flexible, more friendly charging experience

Higher reliability
Service life extended with the temperature rise reduced, high IP level to ensure stable operation in harsh environments

Strong security
Multiple protections to ensure the safety of users and vehicles, such as auto power off, overcharge protection and failure isolation, etc.

Optional charging modes
Two connectors charging two vehicles simultaneously or alternately or on smart power distribution

Easy operation
Multi-language intelligent human-machine interface, easy to operate

Smart management
OCPP supported, intelligent monitoring, remote maintenance and online upgrade avaibale with back office system or mobile app

Back>>

Technical DataCertificates

Input voltage (V)	AC400±10%（3P＋N＋PE）
Max. input current (A)	≤581
Rated frequency (Hz)	50±5%
Power factor	≥0.99
Total Rated power (kW)	360
Output voltage (V)	DC200-1000 (DC50-1000 for China)
Output current of single gun (A)	0-500
Voltage regulation accuracy	≤±0.5%
Steady current accuracy	≤±1%
Current - Unbalance	≤5%
Ripple peak factor	≤±0.5%
Efficiency	≥0.94
No. of charging terminals	2
No. of charging connectors	2
Cable length (m)	5
Connector Type	CCS2 or GB/T
Cooling (for connectors)	liquid cooled
Charging mode	two connectors charging simultaneously, alternately or on smart power distribution
Standards	PLC, IEC 61851; CAN, GB/T27930-2015
HMI	touch screen
Metering	DC watt-hour meter to measure the output power
Communication	Ethernet
Installation	Floor standing
Dimensions (W×D×H:mm)	840 × 880 × 2000 (host)
Dimensions (W×D×H:mm)	650 × 600 × 2000 (terminals)
IP Level	IP54 (Outdoor)
Cooling	Forced air cooled
Ambient temperature (℃)	-30 to 50 (normal output); 50 to 75 (derating output)
Storage temperature (℃)	-40 to 75
Humidity	5%-95% no frost
Altitude (m)	≤2000 (full load output)

Related Cases