ZEVQC-P1 series mobile electric vehicle fast charger adopts wheel design, easy to carry and move. With high efficiency and reliability, it can be widely used in changeable charging sites, emergency power supply or places with no room for fixed charging points, like 4S stores, auto plants, tourist attractions, road rescue or delivery of EVs.
- Applicable to various EVs such as electric cars, trucks, buses, etc.
- Strong adaptability, covering multiple voltage and power levels
- Modular design, easy to expand and maintain
- Higher power density and smaller size
- High-speed CAN communication bus to realize real-time detection and monitoring communication of modules
- Comprehensive protection, safer and more reliable
Efficiency & flexibility
- Fast charging with high current, efficiency up to 95.5%
- Wheel design, easy to move and carry
- Suitable for all kinds of EV models
User-friendly design
- Modular design, easy to replace, maintain and expand
- One-button switch for simpler operation
- Friendly HMI with charging data display
Higher reliability
- Reduce energy consumption, control sensitive, safe and reliable
- Reduce pollution to the grid
- Adapt to a wider range of voltage fluctuations
Multiple protections
- Featured fan failure, battery reverse and insulation fault protection, etc.
- Various auto power-off protections
Model |
ZEVQC-20/750-P1 |
ZEVQC-40/750-P1 |
Rated input voltage (VAC) |
380±20% |
|
Input current (A) |
≤32 |
≤65 |
Rated output power (kW) |
20 |
40 |
Rated output current (A) |
33 |
67 |
Output voltage (VDC) |
200-750 |
|
Peak-to-peak noise |
≤±1% |
|
Regulated current accuracy |
≤±1% |
|
Regulated voltage accuracy |
≤±0.5% |
|
Current - Unbalance |
≤±5% |
|
Efficiency |
≥94% |
|
Frequency (Hz) |
50±10% |
|
Power factor |
≥0.99 |
|
THD |
≤5% |
|
Ambient temperature (℃) |
-20 to 50 |
|
Humidity |
5%-95%, no condensation |
|
Altitude (m) |
≤2000 full load output |
|
Insulation strength |
Insulation resistance > 10M (normal air pressure, humidity < 90%, no condensation, 1000VDC) |
|
LV auxiliary power supply |
12V/24V 10A |
|
MTBF |
> 20000h |
|
Standards |
GB/T27930, NB/T33008.1 |
|
Input cable length (m) |
3 |
|
Output cable length (m) |
2 |
|
Dimensions (W×D×H:mm) |
550x310x540 (in kind prevail) |
|
Weight (kg) |
<50 |
|
Protection |
overvoltage, undervoltage, overcurrent, short circuit, fan failure, battery reversal, insulation fault protection, etc. |